MovieStuff Repairs, Upgrades & Refurbishing
warranty on all repairs, upgrades or refurbishings is 90 days parts and labor

Ship your unit to

MovieStuff
271 Main Street
Utopia, Texas 78884
830-966-4664
 

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net
 

NOTE: Prices do not include repair of shipping damage. So please package
your unit well and include the large front cover on the projector for maximum
protection. Tape a copy of your order form to each item before packaging for shipping.
 

Upgrade existing 8mm 1CCD or 3CCD Sniper-Pro to HD camera.

If you have an 8mm 1CCD or 3CCD  (ScanStream) Sniper Pro unit with the BLACK BASE
we can refurbish the unit and replace the existing camera with an HD camera. This camera
can be used in the SD mode if you are not ready for HD. If you wish to use it in the HD mode (now or later)
then you will simply need to switch the camera to HD and build the appropriate PC (contact us for specs).
The cost for the refurbish and upgrade is $2,695.00 plus $85.00 for shipping in the USA and $165
for international shipping. During the upgrade, your unit will be
disassembled and completely refurbished and relubricated to near-new condition. We need your unit in
our shop for about 30 days to complete the upgrade. If you have any questions, please contact me
before sending in your unit. If you want to proceed, click HERE for the UPGRADE form.
 
 

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
 

Upgrade existing 16mm 1CCD or 3CCD Sniper-Pro to HD camera.

If you have a 16mm 1CCD or 3CCD  (ScanStream) Sniper Pro unit with the BLACK BASE
we can refurbish the unit and replace the existing camera with an HD camera. This camera
can be used in the SD mode if you are not ready for HD. If you wish to use it in the HD mode (now or later)
then you will simply need to switch the camera to HD and build the appropriate PC (contact us for specs).
The cost for the refurbish and upgrade is $3,695.00 plus $85.00 for shipping in the USA and $165
for international shipping. During the upgrade, your unit will be
disassembled and completely refurbished and relubricated to near-new condition. We need your unit in
our shop for about 30 days to complete the upgrade. If you have any questions, please contact me
before sending in your unit. If you want to proceed, click HERE for the UPGRADE form.
 
 

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
 
 

MOTOR and LED UPGRADE for WorkPrinters and Snipers

The new WorkPrinter and Sniper units have a high torque DC motor, super bright LED light source and
a universal power supply that will operate on both 50 and 60 cycles at 100-256VAC, so no transformers
are needed for international usage. The new DC motors also have a larger drive pulley and run cool to the
touch, both of which make the belts last much longer, compared to the original units with the hotter runnning
AC motors. If you have one of the original WorkPrinter or Sniper units and would like to have it
upgraded to the new super bright LED light and DC motor, the cost is $350 for the upgrade plus $50
return shipping in the USA or $85 international return shipping. During the upgrade, your unit will be
disassembled and completely refurbished and relubricated to near-new condition. We need your unit in
our shop for about 5-7 days to complete the upgrade. If you have any questions, please contact me
before sending in your unit. If you want to proceed, click HERE for the UPGRADE form.
NOTE: This price does not include video camera repair.
SEND THE PROJECTOR ONLY!   DO NOT SEND THE BASE!

warranty on all repairs, upgrades or refurbishings is 90 days parts and labor

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net
 
 
 
 

MOTOR and LED UPGRADE for CineMate 15, 20 and PAL

The new 8mm CineMate units have a high torque DC motor, super bright LED light source and
a universal power supply that will operate on both 50 and 60 cycles at 100-256VAC, so no transformers
are needed for international usage. The new DC motors also have a larger drive pulley and run cool to the
touch, both of which make the belts last much longer, compared to the original units with the hotter runnning
AC motors. If you have one of the original CineMate units and would like to have it
upgraded to the new super bright LED light and DC motor, the cost is $450 for the upgrade plus $50
return shipping in the USA or $85 international return shipping. During the upgrade, your unit will be
disassembled and completely refurbished and relubricated to near-new condition. We need your unit in
our shop for about 5-7 days to complete the upgrade. If you have any questions, please contact me
before sending in your unit. If you want to proceed, click HERE  for the UPGRADE form.
NOTE: This price does not include video camera repair.
SEND THE PROJECTOR ONLY!   DO NOT SEND THE BASE!

warranty on all repairs, upgrades or refurbishings is 90 days parts and labor

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net
 
 
 
 

MOTOR UPGRADE KIT for the SNIPER PRO or WORKPRINTER

If you have an original Sniper-Pro, then it already has an LED light source. If you have the
original WorkPrinter that uses a standard bulb, you can just change out the motor, if you wish.
If you want to upgrade the older AC motor to the new DC motor, no need to send your unit to us.
Just send the back cover and we will install a universal power supply and send it back with a
replacement DC motor and bracket that you can install yourself. It will take you about 5 minutes.
------NOTE-----
If international, you will still need to use a transformer with the WorkPrinter if you don't change
the bulb to an LED. However, you will be able to increase the voltage to 120 volts for a brighter image.
If you are an international Sniper user, you will no longer need a transformer after changing the motor.
-----------------------
The cost of the new DC Motor Kit is $150 plus $35 return shipping in the USA or $60 international
return shipping. If you do not want to send us your back cover, we can provide another for an
additional charge of $50. That may cost you less than sending your cover to us and will also
save time. If you have any questions, please contact me before sending in your unit.
If you want to proceed, click HERE for the MOTOR KIT form.

warranty on all repairs, upgrades or refurbishings is 90 days parts and labor

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net
 
 
 
 

MOTOR UPGRADE KIT for CineMate 15, 20 and PAL

If you have an original CineMate that uses a standard bulb, you can just change out the motor.
If you want to upgrade the older AC motor to the new DC motor, no need to send your unit to us.
Just send the back cover and we will install a universal power supply and send it back with a
replacement DC motor and bracket that you can install yourself. It will take you about 5 minutes.
------NOTE-----
If international, you will still need to use a transformer with the WorkPrinter if you don't change
the bulb to an LED. However, you will be able to increase the voltage to 120 volts for a brighter image.
If you are an international Sniper user, you will no longer need a transformer after changing the motor.
-----------------------
The cost of the new DC Motor Kit is $350 plus $35 return shipping in the USA or $60 international
return shipping. If you do not want to send us your back cover, we can provide another for an
additional charge of $50. That may cost you less than sending your cover to us and will also
save time. If you have any questions, please contact me before sending in your unit.
If you want to proceed, click HERE for the MOTOR KIT form.

warranty on all repairs, upgrades or refurbishings is 90 days parts and labor

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net
 
 
 
 

GENERAL REFURBISH or REPAIR ONLY, EBAY, etc.

If you have an 8mm MovieStuff unit that is out of warranty and needs to be refurbished to near-new
condition, the cost is $250 plus $50 return shipping in the USA or $85 return shipping international.
This price does not include any upgrades. Your unit will be cleaned, lubricated and worn parts replaced
but the lamp and motor and switches will be the same style and placement as your original.
This pricing does not apply to video cameras used in our units. If you have a video camera that
needs repair, that charge will be additional to your refurbishing charge.
If this is for resell on EBAY or if you have any questions, please contact me before
sending in your unit. If you want to proceed, click HERE or the REFURBISH form.

For general refurb, send projector only (no base). For ebay, include the condenser lens & accessories (no base).

warranty on all repairs, upgrades or refurbishings is 90 days parts and labor
 
 

Please CONTACT me before sending in any unit for repair, upgrade or refurbishing.
Roger Evans830-966-4664
PayPal to  moviestuff_sales@swtexas.net